What is an ITP in construction?

An Inspection and Test Plan (ITP) is a quality assurance document used in construction to define inspection activities, hold points, and witness points at key stages of work. It specifies what needs to be checked, by whom, and records the results for audit and compliance purposes.

How much does HoldPoint QA cost?

HoldPoint QA charges $45 AUD per active project per month. There are no per-seat fees or per-document charges. Projects start as draft (free) until the first document is added.

Can external clients sign ITPs without an account?

Yes. HoldPoint QA sends a secure sign-off link via email. External signatories (clients, principal's representatives, or engineers), can review the full ITP checklist and sign digitally without needing an account or app.

Does HoldPoint generate ITP PDFs automatically?

Yes. When an ITP is approved, HoldPoint automatically generates a branded PDF containing all checklist results, inspection notes, photos, and signatures. PDFs are regenerated if any information changes.

Do I need an ITP for metal fabrication work in Australia?

If your contract, principal contractor, or client QA manual calls for an Inspection and Test Plan, you need one, whether or not your scope is "construction" in the everyday sense. On commercial and government projects, metal fabrication work is typically assessed against AS/NZS 1554 (Welding and AS 4100) Steel structures, and the ITP is how you show each requirement was actually verified.

What hold points should a Metal Fabrication ITP include?

At minimum: WPS match verification, NDT results review and final dimensional sign-off. Hold points belong wherever a defect would be concealed by following work or expensive to put right, so work stops until the nominated party signs. Your specification or the principal's QA plan may add more.

Which standards apply to metal fabrication inspections?

The references most metal fabrication ITPs cite are AS/NZS 1554 (Welding and AS 4100) Steel structures. Always check the project specification as well, it frequently calls up extra requirements, or a specific edition, on top of the standard.

Can I use an AI-generated metal fabrication ITP on a real project?

Yes, as a starting point. Generate the metal fabrication ITP for your scope, then review it against your contract and specification, especially the hold points, like WPS match verification. Run it through HoldPoint for digital sign-offs, photos, and branded PDFs, and have your QA manager or superintendent approve the final version before it goes to site.

Manufacturing & industrial

AI-powered · Free to try · Save your ITP

Free Metal Fabrication ITP Generator

Generate a complete Inspection and Test Plan for metal fabrication work in seconds. Cutting, welding, NDT, dimensional checks, and coating hold points. Hold points and witness points are placed automatically, edit, brand, and sign off when you're ready.

Metal Fabrication-specific hold points and witness points
Aligned with relevant Australian Standards
Sign up free to download your PDF
Save to your workspace and use on every project

Trade

Scope

Brand

Project

Finish

What trade is this ITP for?

We'll build a practical starter checklist for your trade, you can edit anything after.

Used on live Australian projects

Read their stories

Background

What is a Metal Fabrication ITP?

A metal fabrication ITP is a formal inspection and test plan used in manufacturing and industrial environments to verify processes, installations, and outputs meet specification before release or handover.

The real value of a metal fabrication ITP is the sequence it enforces. WPS match verification, NDT results review and Final dimensional sign-off are set as hold points, so nothing proceeds past them until they've been inspected and signed. Witness points like material traceability, fit-up inspection and surface prep tell the superintendent or client when to attend, without holding up the crew if they can't make it.

For metal fabrication scopes the usual references are AS/NZS 1554 (Welding and AS 4100) Steel structures. Tie each inspection back to the relevant requirement and capture the sign-off with a timestamp and photos, and you have evidence that survives an audit, which an unsigned Word template emailed after the fact does not.

Quality checkpoints

Metal Fabrication ITP Hold Points & Witness Points

The AI generator automatically includes these checkpoints based on your scope description. Hold points require mandatory sign-off before work proceeds; witness points notify the relevant party but don't stop work.

Hold Points

Work stops until signed off

WPS match verification
NDT results review
Final dimensional sign-off

Witness Points

Party notified, work can continue

Material traceability
Fit-up inspection
Surface prep
Transport packaging

Applicable Australian Standards

AS/NZS 1554 (Welding
AS 4100) Steel structures

Audit-grade evidence

GPS & weather captured at every metal fabrication sign-off.

Generating a metal fabrication ITP gets you a checklist. Defending it years later in a defect claim is a different problem. HoldPoint records the inspector's GPS coordinates and the live weather (temperature, humidity, wind, and sky condition), at the moment they sign each hold point. The data prints on the final PDF under the signature.

Temperature on record

Pour temp, ambient, and curing window, automatically logged.

Humidity & wind

Critical for paint, coating, and curing claims under AS standards.

Lat / lng + map link

Proof the inspector was actually on site, not signing from the office.

Available on every paid HoldPoint plan. The free generator gives you the ITP: HoldPoint gives you the defensible record.

Common questions

Metal Fabrication ITP: Frequently Asked Questions

Do I need an ITP for metal fabrication work in Australia?: If your contract, principal contractor, or client QA manual calls for an Inspection and Test Plan, you need one, whether or not your scope is "construction" in the everyday sense. On commercial and government projects, metal fabrication work is typically assessed against AS/NZS 1554 (Welding and AS 4100) Steel structures, and the ITP is how you show each requirement was actually verified.
What hold points should a Metal Fabrication ITP include?: At minimum: WPS match verification, NDT results review and final dimensional sign-off. Hold points belong wherever a defect would be concealed by following work or expensive to put right, so work stops until the nominated party signs. Your specification or the principal's QA plan may add more.
Which standards apply to metal fabrication inspections?: The references most metal fabrication ITPs cite are AS/NZS 1554 (Welding and AS 4100) Steel structures. Always check the project specification as well, it frequently calls up extra requirements, or a specific edition, on top of the standard.
Can I use an AI-generated metal fabrication ITP on a real project?: Yes, as a starting point. Generate the metal fabrication ITP for your scope, then review it against your contract and specification, especially the hold points, like WPS match verification. Run it through HoldPoint for digital sign-offs, photos, and branded PDFs, and have your QA manager or superintendent approve the final version before it goes to site.

Related industries

More Manufacturing & industrial ITP Generators

General Manufacturing ITP Generator

Generate a free general manufacturing Inspection & Test Plan (ITP) with AI in seconds. Production setup, in-process checks, final inspection, and batch release. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Food Production ITP Generator

Generate a free food production Inspection & Test Plan (ITP) with AI in seconds. HACCP checkpoints, hygiene, metal detection, and batch traceability. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Beverage & Brewery ITP Generator

Generate a free beverage & brewery Inspection & Test Plan (ITP) with AI in seconds. Process vessels, CIP, filling lines, and product release QA. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Pharmaceutical Manufacturing ITP Generator

Generate a free pharmaceutical manufacturing Inspection & Test Plan (ITP) with AI in seconds. GMP verification, cleaning validation, and batch record review. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Cleanroom & Controlled Environments ITP Generator

Generate a free cleanroom & controlled environments Inspection & Test Plan (ITP) with AI in seconds. HEPA install, particle counts, pressure cascades, and certification. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Powder Coating ITP Generator

Generate a free powder coating Inspection & Test Plan (ITP) with AI in seconds. Pretreatment, cure profiles, DFT, and adhesion testing. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Browse all 91 industries →

Need to manage ITPs across a live project?

The free generator builds a single ITP. HoldPoint gives you the full workflow, templates, digital sign-offs, photo attachments, audit trails, and automatic PDF generation for every document on every project.

Continue with my ITP in HoldPoint Generate my Metal Fabrication ITP

14 days free. No credit card to start.