Infrastructure & energy
AI-powered · Free to try · Save your ITP
Free Street & Public Lighting ITP Generator
Generate a complete Inspection and Test Plan for street & public lighting work in seconds. Column install, earthing, lux levels, and authority acceptance. Hold points and witness points are placed automatically, edit, brand, and sign off when you're ready.
- Street & Public Lighting-specific hold points and witness points
- Aligned with relevant Australian Standards
- Sign up free to download your PDF
- Save to your workspace and use on every project
What trade is this ITP for?
We'll build a practical starter checklist for your trade, you can edit anything after.
Background
What is a Street & Public Lighting ITP?
A street & public lighting ITP defines the quality verification steps for infrastructure and energy projects, installation checks, testing, commissioning, and hold points before energisation or acceptance.
On a street & public lighting job the plan turns on a handful of mandatory stops: foundation bolt inspection, earthing continuity test and lux level verification. Each of those is a hold point: work doesn't move past it until the nominated party has inspected and signed. Witness points like conduit installation, luminaire mounting and control system setup tell the superintendent or client when to attend, without holding up the crew if they can't make it.
An Australian street & public lighting ITP is normally written against AS/NZS 1158 (Road lighting and AS/NZS 3000) Wiring Rules. Naming the standard you're inspecting to, rather than a generic "inspect and approve" line, is what makes the record hold up in an audit, a defect claim, or a payment dispute.
Quality checkpoints
Street & Public Lighting ITP Hold Points & Witness Points
The AI generator automatically includes these checkpoints based on your scope description. Hold points require mandatory sign-off before work proceeds; witness points notify the relevant party but don't stop work.
Hold Points
Work stops until signed off
- Foundation bolt inspection
- Earthing continuity test
- Lux level verification
Witness Points
Party notified, work can continue
- Conduit installation
- Luminaire mounting
- Control system setup
- Asset register update
Applicable Australian Standards
- AS/NZS 1158 (Road lighting
- AS/NZS 3000) Wiring Rules
Audit-grade evidence
GPS & weather captured at every street & public lighting sign-off.
Generating a street & public lighting ITP gets you a checklist. Defending it years later in a defect claim is a different problem. HoldPoint records the inspector's GPS coordinates and the live weather (temperature, humidity, wind, and sky condition), at the moment they sign each hold point. The data prints on the final PDF under the signature.
Temperature on record
Pour temp, ambient, and curing window, automatically logged.
Humidity & wind
Critical for paint, coating, and curing claims under AS standards.
Lat / lng + map link
Proof the inspector was actually on site, not signing from the office.
Available on every paid HoldPoint plan. The free generator gives you the ITP: HoldPoint gives you the defensible record.
Common questions
Street & Public Lighting ITP: Frequently Asked Questions
- Do I need an ITP for street & public lighting work in Australia?
- If your contract, principal contractor, or client QA manual calls for an Inspection and Test Plan, you need one, whether or not your scope is "construction" in the everyday sense. On commercial and government projects, street & public lighting work is typically assessed against AS/NZS 1158 (Road lighting and AS/NZS 3000) Wiring Rules, and the ITP is how you show each requirement was actually verified.
- What hold points should a Street & Public Lighting ITP include?
- At minimum: foundation bolt inspection, earthing continuity test and lux level verification. Hold points belong wherever a defect would be concealed by following work or expensive to put right, so work stops until the nominated party signs. Your specification or the principal's QA plan may add more.
- Which standards apply to street & public lighting inspections?
- The references most street & public lighting ITPs cite are AS/NZS 1158 (Road lighting and AS/NZS 3000) Wiring Rules. Always check the project specification as well, it frequently calls up extra requirements, or a specific edition, on top of the standard.
- Can I use an AI-generated street & public lighting ITP on a real project?
- Yes, as a starting point. Generate the street & public lighting ITP for your scope, then review it against your contract and specification, especially the hold points, like foundation bolt inspection. Run it through HoldPoint for digital sign-offs, photos, and branded PDFs, and have your QA manager or superintendent approve the final version before it goes to site.
Related industries
More Infrastructure & energy ITP Generators
Solar PV Installation ITP Generator
Generate a free solar pv installation Inspection & Test Plan (ITP) with AI in seconds. Mounting, DC wiring, inverter commissioning, and grid connection hold points. Hold points, witness points, and PDF export, built for Australian QA workflows.
GenerateBattery Energy Storage ITP Generator
Generate a free battery energy storage Inspection & Test Plan (ITP) with AI in seconds. BESS install, isolation, testing, and energisation under AS/NZS 5139. Hold points, witness points, and PDF export, built for Australian QA workflows.
GenerateEV Charging Infrastructure ITP Generator
Generate a free ev charging infrastructure Inspection & Test Plan (ITP) with AI in seconds. Chargers, load management, civil works, and electrical commissioning. Hold points, witness points, and PDF export, built for Australian QA workflows.
GenerateTelecommunications Infrastructure ITP Generator
Generate a free telecommunications infrastructure Inspection & Test Plan (ITP) with AI in seconds. Tower works, antenna install, RF safety, and carrier handover. Hold points, witness points, and PDF export, built for Australian QA workflows.
GenerateWater & Wastewater Treatment ITP Generator
Generate a free water & wastewater treatment Inspection & Test Plan (ITP) with AI in seconds. Process equipment, hydro tests, and performance proving. Hold points, witness points, and PDF export, built for Australian QA workflows.
GenerateWind Energy ITP Generator
Generate a free wind energy Inspection & Test Plan (ITP) with AI in seconds. Foundations, tower erection, electrical, and grid compliance testing. Hold points, witness points, and PDF export, built for Australian QA workflows.
GenerateNeed to manage ITPs across a live project?
The free generator builds a single ITP. HoldPoint gives you the full workflow, templates, digital sign-offs, photo attachments, audit trails, and automatic PDF generation for every document on every project.
14 days free. No credit card to start.