What is an ITP in construction?

An Inspection and Test Plan (ITP) is a quality assurance document used in construction to define inspection activities, hold points, and witness points at key stages of work. It specifies what needs to be checked, by whom, and records the results for audit and compliance purposes.

How much does HoldPoint QA cost?

HoldPoint QA charges $45 AUD per active project per month for 1–5 projects, and $35 per project per month for 6 or more active projects. There are no per-seat fees or per-document charges. Projects start as draft (free) until the first document is added.

Can external clients sign ITPs without an account?

Yes. HoldPoint QA sends a secure sign-off link via email. External signatories — clients, principal's representatives, or engineers — can review the full ITP checklist and sign digitally without needing an account or app.

Does HoldPoint generate ITP PDFs automatically?

Yes. When an ITP is approved, HoldPoint automatically generates a branded PDF containing all checklist results, inspection notes, photos, and signatures. PDFs are regenerated if any information changes.

All templates

ConcreteCommercial

Concrete Curing Inspection & Test Plan

Dedicated ITP for concrete curing regime management covering curing method selection, application timing, duration monitoring, ambient condition recording and early-age strength verification per AS 3600.

12 checklist items

3 hold points

Use this template — it's free

Checklist Preview

Curing Method Selection

Requires sign-off

P/F

Curing method per specification and exposure class

P/F

Curing compound type and application rate

P/F

Curing materials on-site before pour

Hold

Application & Monitoring

Requires sign-off

P/F

Curing commenced within specified time after finishing

Hold

P/F

Compound applied at specified coverage rate

P/F

Water curing depth maintained (if water cured)

P/F

Plastic sheet edges sealed (if sheet cured)

P/F

Ambient temperature recorded during curing

Duration & Strength

Requires sign-off

P/F

Minimum curing duration achieved per AS 3600

Hold

P/F

Hot weather curing provisions (if T > 35°C)

P/F

Cold weather curing provisions (if T < 5°C)

Early-age cylinder strength result (MPa)

Ready to use this template?

Get started free