What is an ITP in construction?

An Inspection and Test Plan (ITP) is a quality assurance document used in construction to define inspection activities, hold points, and witness points at key stages of work. It specifies what needs to be checked, by whom, and records the results for audit and compliance purposes.

How much does HoldPoint QA cost?

HoldPoint QA charges $45 AUD per active project per month for 1–5 projects, and $35 per project per month for 6 or more active projects. There are no per-seat fees or per-document charges. Projects start as draft (free) until the first document is added.

Can external clients sign ITPs without an account?

Yes. HoldPoint QA sends a secure sign-off link via email. External signatories — clients, principal's representatives, or engineers — can review the full ITP checklist and sign digitally without needing an account or app.

Does HoldPoint generate ITP PDFs automatically?

Yes. When an ITP is approved, HoldPoint automatically generates a branded PDF containing all checklist results, inspection notes, photos, and signatures. PDFs are regenerated if any information changes.

All templates

PlumbingResidential

Plumbing Rough-In Inspection & Test Plan

First-fix plumbing ITP covering water supply pipework, waste and vent piping, fixture point locations and pressure testing prior to concealment. Ensures compliance with AS/NZS 3500.

14 checklist items

2 hold points

1 witness points

Use this template — it's free

Checklist Preview

Water Supply Pipework

Requires sign-off

P/F

Pipe material and grade per specification

P/F

Pipe support spacing compliant

P/F

Hot water pipe insulation installed

P/F

Pressure test at 1500kPa for 30 minutes

Hold Witness

P/F

Backflow prevention devices installed

Waste & Vent Piping

Requires sign-off

P/F

Pipe falls per AS/NZS 3500.2 (1:40 min)

P/F

Traps installed at all fixture points

P/F

Vent pipe termination height compliant

P/F

Air admittance valves where permitted

P/F

Drain tested with water to full bore

Hold

Fixture Point Positions

P/F

Basin rough-in heights per drawing

P/F

Toilet set-out dimensions verified

P/F

Shower waste position correct

P/F

Hose cock positions per specification

Ready to use this template?

Get started free